GUTEX Thermosafe-wd®
Compression-resistant insulation for floors and walls
- 20
- 30
- 40
- 60
- 80
- 100
- 120
- 1250x600 mm
λD (W/mK) 0,040
Applications
- Insulation under screed and floor coverings
- Above- and between-rafter insulation
- Interior insulation of ceilings, walls, floors or roofs
- Insulation of timber frame and prefab modular house sections
- Insulation of top storey ceilings
- DIN 4108-10: DAD-dm, DEO-dm
-
Advantages
Technical Data
GUTEX Thermosafe-wd®
- Compressibility with live loads ≤ 5 kN/m2
- Provides excellent thermal insulation
- Consistently uniform board dimensions make installation quicker and easier
- Superior thermal storage capacity provides outstanding insulation against heat in summer and cold in winter
- Improves acoustic insulation
- Regulates humidity and is vapour diffusion permeable
- Manufactured from wood, a sustainable natural resource
- Recyclable
- Biologically safe (natureplus© certified)
- Made in Germany
Certificates & Test marks
InstallationAccessoriesPlease follow the following instructions carefully:
Installation
- Store and install this product dry.
- Substrate must be dry, even and technically sound.
- If required, install a moisture barrier.
- Offset the joints if installing multiple courses.
- Avoid cross joints.
- For best cutting results, use GUTEX blades for jigsaws, a handheld circular saw or insulation saws (e.g. FESTOOL reciprocating saw) and a vacuum fitting.
- Vacuum off the dust in accordance with applicable workplace safety regulations or practices.
- Edge stripping must be as high as the total built-up height of the floor.
- Install the boards so the joints are tight. Use the oddment of the last board of a row to start the next row (refer to layout plan).
- If installing wet screed, lay a moisture barrier over the installed boards.
Maximum built-up height
Layout pattern
GUTEX Thermosafe-wd®
