Exterior
Interior
Cavities
GUTEX Thermoflex®
Flexible woodfibre insulation board
- 30
- 40
- 50
- 60
- 80
- 100
- 120
- 140
- 160
- 180
- 200
- 220
- 240
- 1350x575 mm
λD (W/mK) 0,036
Applications
Exterior
Interior
Cavities
- Between-stud insulation in timber frame, post and beam interior and exterior wall structures
- Between-rafter insulation
- Ceiling insulation
- Partitions/ drywall structures
- DIN 4108-10: DZ, DI-dk, WH, WI, WTR
-
Advantages
Technical Data
GUTEX Thermoflex®
- Drastically stronger fitting
- Incredibly less dust
- Long-lasting, highly effective insulation
- Pleasant to touch and handle, making it a pleasure to use
- High quality look thanks to exceptional homogeneousness
- Declared thermal conductivity 0.037 W/mK delivers superior insulation performance via minimum raw density
- Suitable for just about any wood construction thanks to a diverse selection of thicknesses and sizes
- Cuts to size significantly quicker and cleaner
- High dimensional precision and stability
- Lightweight and flexible like you would expect from batt insulation
- Fits great, insulates great!
Certificates & Test marks
InstallationAccessoriesPlease follow the following instructions carefully:
Installation:
General
- Store and install this product dry.
- Protect this product against moisture.
- Do not stack the pallets one upon another.
- Cut with power handsaw, jigsaw or GUTEX Thermoflex knife.
- Vacuum off the dust in accordance with applicable workplace safety regulations or practices.
- Use either masonry or metal drill at highest rpm.
- A hole saw may be used to cut holes for flush electrical sockets or holes for pipes.
- GUTEX Thermoflex can stand up to temperatures up to 100 °C for an extended period of time. However, avoid exposure to open flames. In addition, we suggest the use of a suitable means to encapsulate sources of heat, such as installation sleeves for recessed lighting fixtures, etc.
Between wood studs or joists
- Cut oversized in both length and width and wedge into place.
Cramping
Cramping
- Oversized dimensions ensure tight joints.
- For best sound insulation performance, fill wall spaces with GUTEX Thermoflex interior up to 80 percent.
- To minimise waste, two pieces can be wedged in next to each other, but make sure the pieces have the appropriate oversize.
- Depending on the construction, the state of the rafters/joists as well as the roof pitch, you may have to adjust the above figures by increasing or decreasing them slightly.
- We suggest cutting the insulation 1 % ≥ the width of the cavity and the overall length of the space.
- Sheets installed in roofs or ceilings have to be secured within three days to prevent them from falling out of the structure in which they are installed.
Between metal studs
- The metal studs are flat on one side and u-shaped on the other side to hold the board. With the exception of the very last upright, all of the uprights (studs) are installed with their u-shaped openings pointing in the same direction. The last stud installs, so that it faces the opposite direction. The board that fits into this upright must be installed first.
- Insert the insulating board, position the stud, and fix in place.
- Install the remainder of the boards.
GUTEX Thermoflex®
