Please follow the following instructions carefully:
Store and install this product dry.
Suitable for single or double course (with offset joints) with max. total build-up thickness of 60 mm (see table below).
If higher insulation built-up heights are required, use GUTEX Thermosafe-wd (max. 100 mm).
Substrate must be dry, even and technically sound.
If required, install a moisture barrier.
Ceilings with exposed wood joists require trickle protection paper.
Edge stripping must be as high as the total built-up height of the floor.
To cut the boards, use GUTEX saw blades for jigsaws or circular saws and a vacuum fitting.
Vacuum off the dust in accordance with applicable workplace safety regulations or practices.
Install the boards so the joints are tight. Use the oddment of the last board of a row to start the next row (refer to layout plan). Edge stripping must be as high as the total built-up height of the floor.
If installing wet screed, lay a moisture barrier over the installed boards.